Electrical Revision Courses and Assessments

The following list indicates the courses we offer at our Burgess Hill and Portsmouth Centres, for a more detailed description of the course contents please click on the link under the 'Entry Requirements' column.

Assessment Category

 Code Revision Duration Revision Times Assessment or Examination Duration Entry Requirements
City & Guilds Portable Appliance Testing C&G 2377 1 day 8:30am - 5pm 1 hour Any electrical operative involved in the inspection and testing of electrical equipment.

OR

Non-technical managers, supervisors etc involved in the Inspection and Testing of Electrical Equipment.
City & Guilds BS7671:Requirements for Electrical Installations (IEE Wiring Regulations 17th Edition ) C&G 2382-10 3 days 8:30am - 5pm 2 hours GOLA Any practising electrician to fully understand and comply with the requirements of BS7671 for inspection, testing and certification of electrical installations.
City & Guilds BS7671:Requirements for Electrical Installations (IEE Wiring Regulations 17th Edition ) C&G 2382-20 1 day 8:30am - 5pm 1 hour GOLA Any practising electrician to fully understand and comply with the requirements of BS7671 for inspection, testing and certification of electrical installations.
City & Guilds Level 2 Certificate in Fundamental Inspection, Testing and Initial Verification. C&G 2392-10  3 days 8:30am - 5pm 1½ hours GOLA This course is ideal for candidates who's work is in the domestic (single phase) field or whose experience in the field of inspection and testing is limited
City & Guilds Level 3 Certificate in Inspection, Testing and Certification of Electrical Installations. C&G 2391-10 4 days 8:30am - 5pm 2½ hours written and ½ day practical Candidates who have experience in inspection and testing will find this course meets their needs.
City & Guilds Level 3 Certificate in Design, Erection and Verification of Electrical Installations C&G 2391-20 4 days 8:30am - 5pm 3 hours written and complete a project This is the old C&G 2400 design and verification course which is seen as the Professional Development (PD) route for the industry. 

EAL Level 2 Certificate for Domestic Electrical Installation

 EAL 006 6 days 8:30am - 5pm 1½ days written and practical Any practising electrician working within Part P of the Building Regulations.
Level 3 Certificate in Building Regulations for Electrical Installation Contractors in Dwellings C&G 2393-10 1 day 8:30am - 5pm 45 mins GOLA Any practicing electrician, operating in dwellings, to gain an understanding of how their electrical installations must comply with all relevant building regulations.

CORGI Electrical Competence Scheme to meet Part P

 ECS 5 days 8:30am - 5pm 2 hours Any person if the scope of their work is specific to the Gas Industry.

NB only available to groups of 6 or more candidates.

Essential Electrics

 N/A 2 days 8:30am - 5pm N/A Any person who connects to fused outlets or plug tops using flexible cables (no more than 2 metres long) or exchange components such as heating controls that are connected via flexible cables (no more than 2 metres long).
One to one ½ day revision courses and one to one training on an hourly basis are also available - please contact us for further details

For further details on any of the above courses please contact us on:

Burgess Hill Centre Phone: 01444 870860
Portsmouth Centre Phone:  02392 190190
Fax: 01444 870820
Email: info@stevewillis.com

 

Back to Home Page